+49 030 6959 250 frage@taube-electronic.de

X-ray Fluorescence-Spectroscopy

4. November 2016

TAUBE ELECTRONIC starts to operate new Fischerscope X-Ray XDV-SSD

Since the implementation of leadfree RoHS compliant assembly processes Micro X-ray fluorescence spectroscopy is a common analytical method at TAUBE ELECTRONIC.

This advanced instrument is used for the screening of circuit board and electronic component surface finishes and also to control the impurities of solder alloys and monitoring of wave and selective soldering equipment.

Beside this it can also be used for the investigation of other very thin finishes on electronic components and for the detection of forbidden substances according to RoHS legislation.

Successful first year with the two new JUKI SMD placement modules RS-1R

TAUBE ELECTRONIC has been successfully using two new JUKI RS-1R placement machines in production since November 2020. After dismantling the old machines and installing...

Successful recertification audit according to DIN EN ISO 9001:2015-11

This year, the ISO 9001:2015 audit took place under special conditions. Due to the current pandemic situation, the entire recertification audit had to be carried out...

01005 components with distance of 60µm to Tantal-A capacitors

In the course of tighter and tighter layouts, this project was intended to test the limits of what is currently feasible with regard to different component sizes in one...

Expansion of the management board at TAUBE ELECTRONIC

Last December Dr. Lothar Weitzel joined TAUBE ELECTRONIC GmbH as Managing Director. The company was already well-known to him, as he had previously worked with Rainer...

300µm

TAUBE ELECTRONIC successfully enters 300µm pitch component class TAUBE ELECTRONIC since many years is one of the pioneers in processing components with very fine pitch....

IPC-A-610 Training Course for Specialists and Trainer 2017

The standard IPC-A-610 (Acceptability of Electronic Assemblies) is the accepted base for the international electronics industry for visual inspection of printed circuit...

Glued Printed Circuit Board

Printed circuit board with stencil printed SMT adhesive in conveyor system of the pick and place machine.

Wetting failure on NiAu-Metallization

Wetting failures on NiAu-surfaces may have different root causes.

Fiducials

Fiducials according to SMEMA-standard have to be provided on all printed circuit boards, which have to be processed automated. The current revision of SMEMA-standard of...

Hidden solder joints

Even with hidden solder joints on conventional leaded components it is required to x-ray for process qualification and testing. By analysys of PCBAs, which were...

Conterfeit components

Components that have been bought from brokers after agreement of customers have to be carefully and in an extended procedure inspected at incoming goods inspection.

Component Failure

A bond wire has been evaporated by electrical overstress. Only visible by x-ray inspection!

Adhesive stencil printing

SMT-components which have to be soldered by wave soldering process before soldering have to be glued to the printed circuit board. The most economical technique is...

X-ray inspection with GE microme|x

For process qualification and inspection of covered solder joints high resolution x-ray inspection is an indispensable condition.

JET-Printing or JET-Dispensing

JET-Printing or JET-Dispensing is a relatively new alternative methode for the application of solder paste. Advantages Stencil free paste printing Flexible application...

Stencil printing

Paste printing is one of the most important factors for quality of solder joints and thus for the reliabiltiy of electronic assemblies. In the stencil printing process...

X-Ray Image of Tantalum Capacitor

Wrong color images often improve the possibility to interpret difficult x-ray images.

Limited Reliability of Solder Joint with Vias in Pads

Vias in pads are a big reliability risk for solder joints, if components are reflow soldered. Often the solder is sucked from the pad through the via, causing a solder...

IPC Apex Expo – Las Vegas

13.03.-17.03.2016 Die IPC Apex Expo findet vom 13. März bis 17. März 2016 im Convention Center, in Las Vegas statt.  Taube Electronic GmbH ist vor Ort. Für weitere...